[c]
int main(void)
{ 	
	error =	fInit_spi
	repl = Enc28j60ReadReg(0x1D);	
}

int fInit_spi (void)
{
	//SPI
	/* ---------------------- Set Pin-Directions ----------------------*/  
	//Output: RES_TCPIP	SS		MOSI		SCK
	DDRB |= (1<<PINB3) | (1<<PINB4) | (1<<PINB5) | (1<<PINB7);
	//Input:	INT_TCPIP	MISO		
	DDRB &= ~(  (1<<PINB2) | (1<<PINB6)   );	
				
	/* ----------------------- Set Init-Levels -----------------------*/ 
	//High:	INT_TCPIP	SS				
	PORTB |= (1<<PINB2)  | (1<<PINB4) ;
	//Low:	RES_TCPIP		MOSI	CLK		MISO
	PORTB &= ~( (1<<PINB3)  | (1<<PINB5) | (1<<PINB7) | (1<<PINB6) );
	
	PORTB |= ( 1 << PINB3 );	// disable SPI Reset	

	SPCR = 0x00;
	SPCR |= (1<<MSTR);
	//SPSR |= (1<<SPI2X);	//for f(Osc)/2
	
	fInit_spi_modeSelection(0);		//Mode 0..3
	// SPI enable
	SPCR |= (1<<SPE);

	
			
	return 0;
}

uint8_t Enc28j60ReadReg(uint8_t nRegister)
{
	uint8_t nByte;

	//SELECT();
	ENC28J60_SPIWRITEBYTE(OPCODE_RCR | (nRegister & REGISTER_MASK));	
	/*if (nRegister & REGISTER_NEEDDUMMY)
	{
		ENC28J60_SPIWRITEBYTE(0);
	}*/		
	nByte = ENC28J60_SPIREADBYTE();
	DESELECT();
	
	return nByte;
}

//write byte to SPI connection
void SpiWriteByte(uint8_t nByte)
{	SPDR = nByte;
	while (!(SPSR & (1<<SPIF))) //Wait for transmission complete
	{	
		asm volatile ("nop");
	}
}

//read byte from SPI connection
uint8_t SpiReadByte()
{	SPDR = 0;	
	while (SPSR & (1<<SPIF))
	{			
		asm volatile ("nop");
	}	
	return SPDR;
}[/c]