$regfile = "attiny45.dat"
$crystal = 32768
$hwstack = 36
$swstack = 8
$framesize = 24

Config Adc = Single , Prescaler = Auto , Reference = Avcc
Config Timer0 = Pwm , Prescale = 1 , Compare B Pwm = Clear Down

Config Portb.0 = Input
Config Portb.1 = Output
Config Portb.2 = Input
Config Portb.5 = Output

Pwm0b = 255
Portb.5 = 0

Taster Alias Pinb.0
Portb.0 = 1

Dim Betriebsstatus As Bit
Dim Betriebsminuten As Word
Dim Bmtagstart As Word
Dim Bmtagende As Word
Dim Cfg_clock_hours_d1 As Byte
Dim Cfg_clock_hours_d2 As Byte
Dim Cfg_clock_minutes_d1 As Byte
Dim Cfg_clock_minutes_d2 As Byte
Dim Tag As Byte
Dim Stunde As Byte
Dim Minute As Byte
Dim Sekunde As Byte
Dim Taster_lang As Bit
Dim Tastendruck As Word
Dim Timer_counter1 As Word
Dim Timer_counter2 As Byte
Dim Fade As Byte
Dim Pause_led As Word
Dim Uldr As Word
Dim Uldr_temp As Word
Dim Uvcc As Word
Dim Uvcc_temp As Word
Dim Vcc_messung As Word
Dim Messungen As Byte

---> BIS HIERHER WIRD DER CODE AUSGEFÜHRT. <---

Cfg_clock_hours_d1 = 0
Cfg_clock_hours_d2 = 0
Cfg_clock_minutes_d1 = 0
Cfg_clock_minutes_d2 = 0
Tag = 0

....