avrdude: Version 6.3-20171130
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/home/xxxxxxx/.avrduderc"
         User configuration file does not exist or is not a regular file, skipping

         Using Port                    : /dev/ttyACM0
         Using Programmer              : STK500V2
         AVR Part                      : ATmega1284P
         Chip Erase delay              : 55000 us
         PAGEL                         : PD7
         BS2                           : PA0
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
           eeprom        65    10   128    0 no       4096    8      0  9000  9000 0xff 0xff
           flash         65    10   256    0 yes    131072  256    512  4500  4500 0xff 0xff
           lock           0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           lfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  9000  9000 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0     0 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0     0 0x00 0x00

         Programmer Type : STK500V2
         Description     : Atmel STK500 Version 2.x firmware
         Programmer Model: STK500
         Hardware Version: 10
         Firmware Version Master : 2.10
         Topcard         : STK501
         Vtarget         : 5.0 V
         SCK period      : 8.7 us
         Varef           : 0.0 V
         Oscillator      : 1.229 MHz

avrdude: AVR device initialized and ready to accept instructions

Reading |                                                    | 0% 0.00savrdude: stk500isp_read_byte(.., signature, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., signature, 0x1, ...)
Reading | #################                                  | 33% 0.01savrdude: stk500isp_read_byte(.., signature, 0x2, ...)
Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9705 (probably m1284p)
avrdude: stk500isp_read_byte(.., lfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., lfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., lfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: safemode: lfuse reads as D2
avrdude: stk500isp_read_byte(.., hfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., hfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., hfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: safemode: hfuse reads as DD
avrdude: stk500isp_read_byte(.., efuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., efuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., efuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: safemode: efuse reads as FD

avrdude: stk500isp_read_byte(.., lfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., lfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., lfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: safemode: lfuse reads as D2
avrdude: stk500isp_read_byte(.., hfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., hfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., hfuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: safemode: hfuse reads as DD
avrdude: stk500isp_read_byte(.., efuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., efuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: stk500isp_read_byte(.., efuse, 0x0, ...)
avrdude: stk500isp_read_byte(): Sending read memory command: avrdude: safemode: efuse reads as FD
avrdude: safemode: Fuses OK (E:FD, H:DD, L:D2)

avrdude done.  Thank you.